OYD-8018 Two Component Structural Silicone Sealant silicone OYADE
OYD-8018 is a two-component, neutral de-ethanolized, and room temperature curing silicone structural sealant with strong adhesion, excellent sealing effect and good mechanical properties. It is specially designed for structural assembly of high-performance architectural curtain wall units. It needs no primer and is compatible with other neutral silicone sealants.
Product manufacturer
OYADEProduct Category
silicone
OYADE silicone OYD-8018 Two Component Structural Silicone Sealant
OYD-8018 is a two-component, neutral de-ethanolized, and room temperature curing silicone structural sealant with strong adhesion, excellent sealing effect and good mechanical properties. It is specially designed for structural assembly of high-performance architectural curtain wall units. It needs no primer and is compatible with other neutral silicone sealants.
Suppliers & Dealers
0 dealers found
Applicators & Contractors
0 installers found
Services & Tools
Comprehensive services and tools to support your silicone project needs
Product Comparison
Complete Technical Specifications for OYADE OYD-8018 Two Component Structural Silicone Sealant
| Property | Value | Unit |
|---|---|---|
| Product Code | OYD-8018 | — |
| Colour | White, Black | — |
| Features | — | — |
| Applications | — | — |
| Packaging | 190, 19, 1.9 | L |
| Shelf Life | It is a non-hazardous product, please store it in a cool and dry place at a temperature below 27°C. The expiration date is 12 months, and it is recommended to use it within 6 months after purchase. | — |
| Silicone Type | structural | — |
| Available Sizes | — | ml |
| Curing | Neutral dealcoholization curing, releasing low molecular alcohol substances during curing, without irritating or unpleasant odor. | — |
| Certificate | GB29755, ASTMC1369, EN1279-4 | — |
| Limitation | Not for structural use, avoid temperatures below 4°C or above 40°C, do not apply on wet or frosted surfaces, not suitable for continuously wet or submerged areas, avoid surfaces that release oils, plasticizers, or solvents | — |
| Instructions | After mixing components A and B, cross-linking begins and curing depends on the mix ratio, full strength achieved after 14 days at room temperature, do not move or touch before curing, minimal maintenance required replace damaged seal and clean with solvent before reapplying, apply glue in one direction to avoid air bubbles and ensure proper sealing | — |
| Maintenance | After mixing A and B, cross-linking starts and curing depends on the mixing ratio, full strength achieved after 14 days at room temperature, do not move or touch insulating glass before curing, low maintenance replace damaged joints clean with solvent and refill with same sealant | — |
| Safety | Non-toxic after full curing, avoid eye contact rinse immediately with plenty of water and seek medical help if exposed, keep uncured product away from children, releases alcohol during curing ensure proper ventilation to prevent harmful concentration | — |
| Silicone Type | — | — |
Product Documents & Downloads
No documents available for this product
